File Name
DT Series Dataloggers Installation Guidelines
Resource Type
Manual| Language | Version | Download |
|---|---|---|
| English | ELM0089B |
|
DTSAA: DT ShapeArray
The DT ShapeArray data logger is designed to measure a single ShapeArray sensor.
Overview
The DTSAA Data Logger enables stand alone and radio-telemetry data collection of Measurand ShapeArray instruments.
ShapeArray instruments can be incorporated into a wireless, or stand alone, data collection system by using the DTSAA Data Logger. The DTSAA can read ShapeArray sensors configured in low power mode. If configured with an RSTAR radio, the data logger will transmit data to a RSTAR hub allowing automated data conversions.
DTSAA: DT ShapeArray Specifications
| ITEM | SPECIFICATION |
| Memory Records | Up to 8,000 segment readings |
| Power Source | Power Source Lithium D Cell Primary Battery |
| Battery Life | Typically 2 years with a 100 segment ShapeArray on 1-hour reading frequency and equipped with RSTAR L900 radio. See manual for recommended battery replacement schedules. Variables include ShapeArray length, reading frequency, ambient temperature, and telemetry option. |
| Communication | USB Type B connector (radio optional) |
| Dimensions | 190 x 75 x 55 mm (7.48 x. 2.95 x 2.17 in.) |
| Temperature Range | -40°C to 60°C (-40° to 140°F) |
| Enclosure | NEMA 4X (IP66) |
| Range | Up to 14 KM (900MHz Line of Sight, see RSTAR Manual for more details) |
Memory Specifications
| ITEM | SPECIFICATION |
| Memory Size | 4MB |
| Data Transfer | 4,000 data points per second |
| Variable Rate Mode | 16 user-programmable sampling rates |
| Data Format | SAASuite Compatible .dat file |
| Memory Full Behaviour |
The DTSAA: DT ShapeArray is commonly used where automated collection of data, wireless or otherwise, is required from instruments that are bussed together along one single cable running the length of the entire chain of connected ShapeArrays.
DTSAA ShapeArray Logger ordering info
| ITEM | PART # |
| DT ShapeArray Logger | DTSAA |
| Cable Gland Nut Wrench | DT100 |
| Pole Mount Kit | DT20XX-M1 |
| 4” Secondary Enclosure | DT2011-SE |
Options
| RSTAR L900 – automated wireless data collection |
File Name
DT Series Dataloggers Maintenance and Service Guidelines
Resource Type
Manual| Language | Version | Download |
|---|---|---|
| English | ELM0088B |
|
File Name
DTSAA ShapeArray Datalogger Manual
Resource Type
Manual| Language | Version | Download |
|---|---|---|
| English | ELM0105A |
|
File Name
DTSAA: DT ShapeArray
Resource Type
Brochure| Language | Version | Download |
|---|---|---|
| English | ELB0088A |
|
| Spanish | ELB0097A |
|
| Portuguese | ELB0096A |
|
File Name
DT Logger Host Software for PC
Resource Type
SoftwareNote
Unzip the ZIP file once it is downloaded.
From the extracted files, double click on the “.exe” file.
Follow the instructions to install.
| Language | Version | Download |
|---|---|---|
| English | 1.20.0 |
|
| English | Release Notes |
|
File Name
DT Logger Host Instruction Manual PC Platform
Resource Type
Manual| Language | Version | Download |
|---|---|---|
| English | ELM0080R |
|
File Name
Firmware Updates for PC (Logger Firmware Update.exe)
Resource Type
SoftwareNote
The following loggers firmware can be updated using this utility:
DT2011, DT2011B, DT2055B, DT2040, DT4205, RTU, DTL201B, DT2485, DT2350, GAA2820, DTSAA
Only download and install the firmware for your device if you have been instructed by a representative from RST Instruments Ltd. Any unnecessary installation of the firmware can cause unexpected device behaviour.
Please contact RST Technical Support for more information:
Email: [email protected]
Telephone: 604-540-1100
| Language | Version | Download |
|---|---|---|
| English | 1.25 |
|
File Name
8-inch Secondary Enclosure Installation Guide
Resource Type
Installation Guide| Language | Version | Download |
|---|---|---|
| English | ELI0095A |
|
Speak with an Expert
I’m very happy with the quality of the instrumentation and technical support from RST, as always. They worked with us from the initial stages of the project to ensure that we were fully prepared and equipped to use the RSTAR network for the first time. They delivered everything within the tight project time frame to ensure that there were no delays on site, and the submersible tilt meters looked like new even after over twelve months of being submerged in Thames water!
-Richard Lipscombe, BEng (Hons), Director & Principle Consultant - RL Geotechnical Ltd