File Name
RSTAR L900 Wireless Data Acquisition for Geotechnical Instruments
Resource Type
BrochureLanguage | Version | Download |
---|---|---|
English | ELB0045Q | |
Spanish | ICB0077A |
The RSTAR Array Radio Series uses wireless technology to provide automated data acquisition.
The RSTAR Array Radio Series uses wireless technology to provide automated data acquisition. A complete RSTAR L900 System uses L900 RSTAR Nodes at the sensor level, deployed in a star topology from a continuously active L900 RSTAR Hub, which consists of an L900 RTU interfaced to a FlexDAQ Data Logger. The RSTAR Array Radio Series is based on the 900 MHZ, 868 MHz, and 2.4 GHz spread spectrum band (country dependent) with extensive open-country range through use of simple dipole or directional antennae.
Power requirements for a single RSTAR L900 node is one lithium standard cell. The FlexDAQ can be powered by a solar panel, batteries, or AC power.
ITEM | SPECIFICATION |
Operating Frequency (country dependent) | 900 MHz, 868 MHz, 2.4 GHz – Spread Spectrum band |
Access Frequency | 24 hours |
Outdoor Range | Up to 14 km (at 900 MHz) in open country, depending on frequency and antenna |
Maximum Nodes | 255 |
Communication | See diagram on inside |
L900 NODE SPECIFICATIONS
ITEM | SPECIFICATION |
Memory | 4 MB |
Time Format | Month / day / year Hour / minute / second |
Power Source | 1 lithium standard cell battery |
Additional Quiescent Current | 15 µA |
Battery Life | Years |
Temperature Range | -40°C to 60°C (-40° to 140°F) |
Enclosure dimensions will vary according to chosen data logger |
A wireless data collection system to quickly get you connected to your data.
View illustrations on how this is used for:
DATA LOGGER | DESCRIPTION |
DT2011B | Single Channel Vibrating Wire Data Logger |
DT2040 | 20/40 Channel Vibrating Wire/Thermistor Data Logger |
DT2055B | 5/10 Channel Vibrating Wire/Thermistor Data Logger |
DT2306 | Potentiometer Data Logger |
DT2350 | 2 Channel Load Cell Data Logger |
DT2485 | Digital Bus (DT-BUS) Data Logger |
DT4205 | 5/10 Channel 4-20mA Transmitter Data Logger Thermistor Data Logger |
DTL201B | Uniaxial Tilt Data Logger |
DTL202B | Biaxial Tilt Data Logger |
ELGL1430 | flexDAQ Data Logger CR300 (RSTAR Hub) |
ELGL1206 | flexDAQ Data Logger CR6 (RSTAR Hub) |
Please specify frequency based on location
FREQUENCY | LOCATION |
900 MHz | North America |
2.4 GHz | Worldwide |
868 MHz | EU Countries/Europe |
900 MHz | Australia |
900 MHz | Brazil (Anatel) |
900 MHz | Chile |
900 MHz | Singapore |
*Optional GeoViewer: A sensor configuration with RSTAR is easily incorporated into RST’s GeoViewer Software for multi-sensor management.
RSTAR L900 Wireless Data Acquisition for Geotechnical Instruments
Language | Version | Download |
---|---|---|
English | ELB0045Q | |
Spanish | ICB0077A |
RSTAR L900 Wireless Data Acquisition for Geotechnical Instruments Install Guidelines
Language | Version | Download |
---|---|---|
English | ELM0089B |
RSTAR L900 Wireless Data Acquisition for Geotechnical Instruments Instruction Manual
Language | Version | Download |
---|---|---|
English | ELM0077I |
I’m very happy with the quality of the instrumentation and technical support from RST, as always. They worked with us from the initial stages of the project to ensure that we were fully prepared and equipped to use the RSTAR network for the first time. They delivered everything within the tight project time frame to ensure that there were no delays on site, and the submersible tilt meters looked like new even after over twelve months of being submerged in Thames water!
-Richard Lipscombe, BEng (Hons), Director & Principle Consultant - RL Geotechnical Ltd