File Name
DT Link Wireless
Resource Type
Brochure| Language | Version | Download |
|---|---|---|
| English | ELB0048I |
|
| Portuguese | ELB0085A |
|
| Spanish | ELB0063D |
|
DT Link Wireless Data Collection from Data Loggers
DT LINK is a wireless connection to RST DT Series Data Loggers for quick collection of sensor data. It is ideal for data loggers situated in ‘point-to-point’ and line of sight settings where access may be limited, hazardous or disruptive. DT LINK is an alternative to USB wired connections and offers low power consumption and long battery life.
Overview
DT LINK is a wireless connection to RST DT Series Data Loggers for quick collection of sensor data. It is ideal for data loggers situated in ‘point-to-point’ and line of sight settings where access may be limited, hazardous or disruptive. DT LINK is an alternative to USB wired connections and offers low power consumption and long battery life.
DT LINK WIRELESS SPECIFICATIONS
| ITEM | SPECIFICATION |
| Wireless Type | 900 MHz spread spectrum (Americas, Australia) 868 MHz (Europe) 2.4 GHz (other countries) |
| RF Power | 24 dBm (900 MHz) 13 dBm (868 MHz) 10 dBm (2.4 GHz) |
| Typical range (line of sight with basic dipole antenna, ≈1 m off ground) |
800 m (900 MHz) 500 m (868 MHz) 300 m (2.4 GHz) |
| Throughput | 380,000 Bytes/minute |
| Battery Life, D size lithium cell | 3-5 years depending on reading frequency, sensor type and quantity, weather conditions |
| * NOTE: Higher gain antennas are available. Contact RST with project specifics. |
The DT Link Wireless is commonly used to:
- Collect data from data loggers attached from the underside of a bridge’s deck or high up on its pillars or beams.
- Collect data in underground mines and also in open-pit mines.
- Collect data over lakes, rivers and streams.
- Collect data across ravines and valleys.
*The data logger must be within the line of sight and within the specified antenna range.
View illustrations on how DT Link Wireless is used for wireless data collection
DT Link Wireless Data Collection from Data Loggers Ordering Info
| ITEM | PART # |
| Single Channel Vibrating Wire with Thermistor Data Logger | DT2011B DTLINK |
| 5/10 Channel Vibrating Wire/Thermistor Data Logger | DT2055B DTLINK |
| 20/40 Channel Vibrating Wire/Thermistor Data Logger | DT2040 DTLINK |
| 5/10 Channel 4-20mA Transmitter/Thermistor Data Logger | DT4205 DTLINK |
| Bus Data Logger | DT2485 |
| ShapeArray Data Logger | DTSAA |
| 5 Channel 4-20mA (2 wire) Data Logger | DT4205 |
| DT LINK HUB | DT LINK HUB |
DT LINK POWER OPTIONS
| OPTION | DESCRIPTION |
| External Power Adapter | Included with DTLink Hub – for use when AC/mains power is available. Laptop required to connect to the DTLink Hub. |
| Vehicle Power Adapter | Included with DTLink Hub – for use when using hub from a vehicle. Laptop required to connect to the DTLink Hub. |
| Laptop | Most laptops can power the DTLink hub via USB but RST cannot guarantee that it will work in all cases. Please see manual for more details. |
File Name
DT Link Wireless Data Collection from Data Loggers Installation Guidelines
Resource Type
Manual| Language | Version | Download |
|---|---|---|
| English | ELM0089B |
|
File Name
DT Logger Host Instruction Manual PC Platform
Resource Type
Manual| Language | Version | Download |
|---|---|---|
| English | ELM0080R |
|
File Name
DT Series Dataloggers Maintenance and Service Guidelines
Resource Type
Manual| Language | Version | Download |
|---|---|---|
| English | ELM0088B |
|
File Name
DT Logger Host Software for PC
Resource Type
SoftwareNote
Unzip the ZIP file once it is downloaded.
From the extracted files, double click on the “.exe” file.
Follow the instructions to install.
| Language | Version | Download |
|---|---|---|
| English | 1.20.0 |
|
| English | Release Notes |
|
File Name
8-inch Secondary Enclosure Installation Guide
Resource Type
Installation Guide| Language | Version | Download |
|---|---|---|
| English | ELI0095B |
|
Speak with an Expert
I’m very happy with the quality of the instrumentation and technical support from RST, as always. They worked with us from the initial stages of the project to ensure that we were fully prepared and equipped to use the RSTAR network for the first time. They delivered everything within the tight project time frame to ensure that there were no delays on site, and the submersible tilt meters looked like new even after over twelve months of being submerged in Thames water!
-Richard Lipscombe, BEng (Hons), Director & Principle Consultant - RL Geotechnical Ltd