Windows Certified Drivers

RST Instruments Ltd. provides Windows® Certified Drivers for our devices that use USB communication. This certification is your peace of mind that the USB drivers we provide for your product are stable, and fully authenticated by Microsoft® to be compatible with your particular Windows® Operating System. All USB drivers are available automatically through Windows® updates.
Microsoft, and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries.

Supported Windows® Operating Systems:

  • Windows 7 (x86 and x64)
  • Windows Server 2008 R2 (x64)
  • Windows 8 (x86 and x64)
  • Windows Server 2012 (x64)
  • Windows 8.1 (x86 and x64)
  • Windows 10 (x64)



RST USB Drivers (Ver
Upon download completion, run “InstallRSTDrivers.exe” then follow instructions in device Software Host Manual.


*NOTE: The RST USB DRIVER utility (above) is universal and will install drivers for the following RST devices:

  • DT2011B
  • DT2040
  • DT2055
  • DT2055B
  • DTL201B Tilt Logger
  • DTL202B Tilt Logger
  • DT2306
  • DT2350 Load Logger
  • DT2485 DT-BUS Logger
  • DT4205 4-20 mA Logger
  • DT LINK Adapter
  • RTU
  • MTCM – Graphing Logger
  • MTCM – Closure Station
  • RST RS485 to USB Sensor Interface
  • C109
  • IC6656L Tilt Logger
  • IR420
  • IR5000
  • LP100
  • MA7 Readout
  • QB120
  • SG350
  • TH2016 serial numbers TR5452 and greater
  • TH2016B
  • VW0420 serial numbers 2072 and greater
  • VW2106 serial numbers VR0460 and greater
  • VW2016B
  • VW2110
  • GAA2820


Download the file and from the extracted files, follow the instructions on the “Dongle Instructions.txt” file.

Speak with an Expert

I’m very happy with the quality of the instrumentation and technical support from RST, as always. They worked with us from the initial stages of the project to ensure that we were fully prepared and equipped to use the RSTAR network for the first time. They delivered everything within the tight project time frame to ensure that there were no delays on site, and the submersible tilt meters looked like new even after over twelve months of being submerged in Thames water!
-Richard Lipscombe, BEng (Hons), Director & Principle Consultant - RL Geotechnical Ltd