File Name
MR3003BLA datasheet
Resource Type
Brochure| Language | Version | Download |
|---|---|---|
| English |
|
MR3003BLA
The MR3003BLA is a family of instruments dedicated to the monitoring of explosioninduced vibrations. The three channels for vibration and the channel for air overpressure make them perfect for a complete blasting monitoring.
Product supplied by Syscom Instruments.
Overview
The MR3003BLA is a device developed specifically for the monitoring of vibrations induced by explosions. The MR3003BLA offers 4 acquisition channels: 3 dedicated to vibrations and one to air overpressure.
The MR3003BLA devices are equipped with an embedded 4G module for wireless data transfer, and they can be linked to the SCS (Syscom Cloud Software) to offer a near real-time reporting solution with graphical norm comparison and alarming in case of norm exceedance.
Data recording
| ITEM | SPECIFICATION |
| Resolution | 24 bits |
| Sampling-rate | 1’000, 2’000, 4’000 sps |
| Number of channels | 4 |
| Recording principle | Event recording (time history), continuous time recording, manual trigger |
| Data memory | Removable SD card (4Gb) |
| Minimum trigger level | 0.01 mm/s (0.0004 in/s) |
| Trigger voting logic | Predefined AND or OR combinations, individual channel votes |
| Pre-event recording | 1-99 seconds (@250Hz), others depending on sampling rate |
| Post-event recording | 1-100 seconds |
| Alarm principle | Multiple level triggers with many notification options (settable for each axis) |
| File event format | XMR/ASCII (if no microphone), ASCII (if microphone is present) |
Connectivity
| ITEM | SPECIFICATION |
| Mobile Network | Internal 4G modem, fallback 3G/2G |
| Wi-Fi access | IEEE 802.11 b/g/n compliant |
| LAN connectivity | On MR3003BLA housing |
Physical characteristics
| ITEM | SPECIFICATION |
| Housing | Aluminium IP65, 120 x 180 x 100 mm (4.7 x 7.1 x 3.9 in), 1.5 kg |
| Temperature/humidity | -20° up to 70°C / Up to 100% RH |
External MS2003BLA triaxial velocity sensor
| ITEM | SPECIFICATION |
| Sensor type | Triaxial geophone with linearized frequency response |
| Calibration | To be specified at the time of purchase between: • ISEE: calibration according to ISEE Performance Specification for Blasting Seismographs • DIN: calibration according to DIN 45669-1 |
| Measuring range full scale | ISEE: ±250 mm/s (±10 in/s); DIN: ±100 mm/s (±4 in/s) |
| Frequency range | ISEE: 2-250 Hz; DIN: 1-315 Hz |
| Dynamic range | > 110 dB |
| Linearity/Phase | Class 1 (according to DIN 45669) |
| Cross axis sensitivity | <5% (according to DIN 45669) |
| Dimensions/weight | 100 x 100 x 81 mm (3.9 x 3.9 x 3.2 in) / 1.0 kg |
| Connector | Cable gland with 1.5 m cable and LEMO 2K push-pull connector |
| Accessories | Mounting platform for short- or long-term monitoring, soft-soil spike |
External high-pressure microphone
| ITEM | SPECIFICATION |
| Sensor type | Air pressure microphone – Array microphone |
| Measuring range | 148 dB (L) ± 3 dB |
| Frequency range | 2-250 Hz |
| Dimensions/weight | 60 mm length, 7 mm diameter / 5.5 g |
| Connection | LEMO coaxial push-pull connector with SMB socket 1.5 m |
Power supply
| ITEM | SPECIFICATION |
| Supply voltage | 9 to 14.5 VDC or 48 V PoE |
| Battery pack | MA3P, 100-240 V AC input, Lithium battery 93Wh |
| Power consumption | From 1.2 W to 1.6 W depending on the accessories and configuration |
Speak with an Expert
I’m very happy with the quality of the instrumentation and technical support from RST, as always. They worked with us from the initial stages of the project to ensure that we were fully prepared and equipped to use the RSTAR network for the first time. They delivered everything within the tight project time frame to ensure that there were no delays on site, and the submersible tilt meters looked like new even after over twelve months of being submerged in Thames water!
-Richard Lipscombe, BEng (Hons), Director & Principle Consultant - RL Geotechnical Ltd