Customer success story
Underground Tunnel Monitoring
The piezometers withstood all the rigors of the site’s excavation and provided consistent data until final destruction by the road header. The collected data are crucial for the understanding of the geomechanical forces acting during excavation operations in future projects.
Potential disruptions during the excavation were minimized and the road header was successfully constructed.
A tunnel for an underground laboratory for the Swiss National Cooperative for the Disposal of Radioactive Waste (Nagra), in Switzerland, required continuous monitoring during excavation until the roadheader finally mills through the individual VW transducers (see drawing above).
The engineering team (Polymetra) wanted to monitor the pore pressure in the ground as it related to the effects of the tunnel excavation. Thereby, a cost-effective minable solution was required with reliable data output, even under heavy tunnel excavation.
The borehole was inclined and the rock permeability was very low; the proposed solution (installed VW Piezometers) needed to work in these conditions and withstand the rigors of the excavation.
A subcontractor drilled a 16 m deep, inclined borehole from a niche through the tunnel face and fully grouted Vibrating Wire Piezometers from RST were installed. After the grout cured and the pore pressure stabilized, a road header was mining through the tunnel.
The road header originated from an access tunnel to the point where it would mill through the individual piezometers. The piezometers withstood all the rigors of the site’s excavation until they were destroyed by the roadheader.
Understanding the geomechanical forces during excavation is crucial to improve decision making for future excavation in mining and tunnel projects.
The continuous data transmitted from the piezometers gives a fully minable and cost-effective solution compared to standard multipacker systems. The DT2055B is powered by a single lithium ‘D’ cell, which provides years of power and unattended monitoring.
All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods without the prior written permission of RST Instruments Ltd. RST reserves the right to change specifications without notice. ©2019 RST Instruments Ltd. MIR0052A DEC 09 2019.