Cables

Category:

RST Instruments Ltd. offers a variety of cables that can be effectively matched to any instrument that requires a signal cable.

Quantity

Add to Quote

Overview

RST Instruments Ltd. offers a variety of cables that can be effectively matched to any instrument that requires a signal cable. RST uses Meter Marked Cable for a majority of our instruments that require a signal cable such as those used in Vibrating Wire Piezometers, Load/Pressure Cells, Crack Meters, Joint Meters, etc. In the unfortunate event of the cable being accidentally severed, the meter cable markings can be cross-referenced with the calibration record.


CABLE SPECIFICATIONS

MODEL DESCRIPTION USED FOR: CONDUCTORS DIAM. O.D.
EL380002 Abrasion-resistant polyurethane jacket. Single Point Thermistors 2 (1 twisted pair), 24 AWG (0.20 mm2) 5.33 mm (0.210 in.)
EL380004 Standard vibrating wire cable, abrasion-resistant polyurethane jacket. · Vibrating Wire Piezometers and most other VW instruments
· Strain Gauge Load Cells
· MEMS In-place Inclinometers
· MEMS Tilt Meters & Beams
4 (2 twisted pairs), 22 AWG (0.33 mm2) 6.35 mm (0.250 in.)
EL380004HDL Heavy Duty Cable with a thick polyurethane jacket mold for added protection. Direct burial of surface cable for:
· Vibrating Wire Piezometers and most other VW instruments
· MEMS In-place Inclinometers
· MEMS Tilt Meters & Beams
4 (2 twisted pairs), 22 AWG (0.33 mm2) 9.52 mm (0.375 in.)
EL380004K Kevlar® reinforced, non-stretch polyurethane jacketed cable for rigorous installations where the stretching of the cable is a concern. VW Piezometers 4 (2 twisted pairs),22 AWG (0.33 mm2) 6.35 mm (0.250 in.)
EL370004 Thin polyurethane jacket mold. · VW Rebar Strain Meters
· VW Embedment Strain Gauges
· VW Arc Weldable Strain Gauges
4 (2 twisted pairs), 24 AWG (0.20 mm2) 4.76 mm (0.1875 in.)
EL342202 HDPE jacket. · Used in acidic applications (leachate) and land fills
· Saltwater
4 (2 twisted pairs), 22 AWG (0.33 mm2) 6.35 mm (0.250 in.)
EL35VT04 Vented polyurethane cable for barometric compensation; Kevlar® reinforced. Low-Pressure Vented Transducers 4 (2 twisted pairs), 22 AWG (0.33 mm2) 7.92 mm (0.312 in.) (jacket) 3.17 mm (0.125 in.) OD (vent tube)
EL380006 Water blocked, polyurethane jacket. Grease blocked. · In-Place Tiltmeters (analog biaxial)
· Strain Gauge Analog Piezometer with Thermistor
· Push-In Pressure Cells
· Thermistor Strings
6 (3 twisted pairs), 22 AWG (0.33 mm2) 6.35 mm (0.250 in.)
EL360008 Polyurethane jacket. · MPBX Heads
· VW Load Cells
· Remote multiplexer connection cable to logger
· Thermistor Strings
8 (4 twisted pairs), 20 AWG (0.52 mm2) 8.13 mm (0.320 in.)
EL380012 Kevlar® reinforced, polyurethane jacket. Grease blocked. · Thermistor Strings and VW Piezometer Strings
· VW Load Cells
· MPBX Heads
12 (6 twisted pairs), 24 AWG (0.20 mm2) 10.54 mm (0.415 in.)
EL380007P Polyurethane jacket. · Thermistor Strings and VW Piezometer Strings
· VW Load Cells
· MPBX Heads
14 conductors (7 pairs), 22 AWG (0.33 mm2) 9.84 mm (0.3875 in.)
EL380013P Kevlar® reinforced, polyurethane jacket. Grease blocked. · Thermistor Strings and VW Piezometer Strings
· VW Load Cells
· MPBX Heads
26 (13 twisted pairs), 24 AWG (0.20 mm2) 10.88 mm (0.425 in.)

Cables are commonly used for various types of sensors, in various environments, requiring a signal cable.

File Name

Cables

Resource Type

Brochure
Language Version Download
English MIB0063H
Spanish MIB0073E

Speak with an Expert

I’m very happy with the quality of the instrumentation and technical support from RST, as always. They worked with us from the initial stages of the project to ensure that we were fully prepared and equipped to use the RSTAR network for the first time. They delivered everything within the tight project time frame to ensure that there were no delays on site, and the submersible tilt meters looked like new even after over twelve months of being submerged in Thames water!
 
-Richard Lipscombe, BEng (Hons), Director & Principle Consultant - RL Geotechnical Ltd